LIGHTING EQUIPMENT
- 250 VDC Ballasts & Shock Mounts
400 WATT BALLASTS
1000 WATT BALLAST
Solve 250 VDC cranelight lighting by installing MERCURY VAPOR resistor ballasts. Convert fragile, short life incandescent lighting into heavy duty long life mercury vapor.
The resistors employed in these ballasts are wire wound on ceramic cores. The enclosures are heavy gauge steel with the outdoor 400 Watt version in a NEMA 3 louvered box.
| MODEL NUMBER | LAMP TYPE | OVERALL DIMENSIONS |
|---|---|---|
| TBA14MVB Supercedes 2500A & 2600 | 1- 400 W. H33-1 Indoor/Outdoor | 13.5" H X 7" W X 5" D |
| 2700 | 1- 1000 W. H34-12 Indoor | 14" H X 12" W X 6" D |
| NOTICE: The above Resistor Ballasts are for 250 DC Cranes and not for general illumination | ||
SUPER HEAVY DUTY SHOCK MOUNT
Extend lamp life with this cast aluminum shock mount. The lighting fixture floats on a solid rubber base that absorbs shock and vibration. A ground connection is installed between the top and bottom of the shock mount for added safety.
- 100% weatherproof
- Extra thick casting
- 1/2" or 3/4" IPS models
| SM-1/2 | 1/2" IPS SM |
|---|---|
| SM-3/4 | 3/4" IPS SM |
HEAVY DUTY SHOCK MOUNT
This combination shock mount and junction box protects against shock and vibration while offering the added feature of a junction box. The shock mount must be ordered with the junction box. The junction box can be ordered separately.
- Four bolt flange base shock mount.
- 3/4" IPS inlet each end, solid cover junction box.
- 3/4" IPS for swivel arm.
| P-19 | Shock Mount |
|---|---|
| 211 | Junction Box |